Everyone must be familiar with the large-scale amusement equipment Shenzhou UFO. This is an amusement facility that belongs to mechanical products, so it is not as sophisticated as electronic products. So when the amusement equipment fails, and the manufacturer is far away and cannot solve the problem in time, what should we do? If you have some maintenance skills, the problem will not be difficult.
What work needs to be done before dismantling and replacing large-scale amusement equipment? Many merchants rent amusement equipment in amusement parks or amusement parks. Many times, amusement parks may change venues due to some factors. So when changing venues, large-scale amusement equipment needs to be disassembled. When dismantling and replacing large-scale amusement equipment, what do we need to do before? The following Zhengzhou Aerospace Amusement Equipment will teach you some relevant skills.
When dismantling large-scale amusement equipment, it is necessary to prepare large industrial vehicles, cutting machines, and small wrenches and other equipment. Before dismantling large amusement equipment, you need to turn off the power supply and control power supply. After turning off the power supply, clean the materials (electric cabinet, air pump, equipment parts) contained in the amusement equipment. After cleaning, put away all the pipeline equipment and parts. Secondly, remove the control wires of the power supply and control power supply.
The disassembled parts should be checked and marked. There are many matching components and parts in the Phoenix Flying Equipment. Due to selection or weight balance and other reasons, the assembly position and direction are not allowed to be changed. When disassembling, check the original marks. If the original marks are messed up or unclear, they should be re-marked as they are so that they can be installed in place to avoid confusion. The following principles should be followed when storing the disassembled parts: parts of the same type or the same part should be placed together as much as possible, and they should be stored separately according to the size and precision of the parts. Parts that should not be interchanged should be stored in groups. Precision parts that are afraid of dirt and touch should be disassembled and stored separately. Rubber parts that are afraid of oil should not be stored with oily parts. Parts that are easy to lose (such as washers and nuts) should be tied together with wire or placed in containers. Various bolts should be installed with nuts for storage.
Protect the surface of the disassembled parts. During the disassembly process, do not damage the surface of the disassembled parts, otherwise it will bring difficulties to the repair work, and it may also cause air leakage, oil leakage, water leakage and other faults, and will also reduce the technical performance of the machine. Large-scale amusement equipment contains more current equipment, and generally requires guidance from relevant masters. If customers are unsure, they can consult with the amusement equipment manufacturers in the department, which will also reduce the damage to the amusement equipment parts.
