1. General friction.
When I just bought the children’s play equipment, all the parts are very smooth and almost no friction. In order to run the equipment better and stably and extend its service life, we need to add lubricating oil to the areas that are easy to rub at this time.
2. Steady run-in.
The place where the children’s play equipment is prone to friction has a hardening phenomenon, and the microscopic geometry has changed. At this time, we should continue to observe and lubricate and maintain;
3. Severe wear.
When the children’s play equipment has serious wear, the metal surface layer has basically reached the fatigue limit, so the use of children’s play equipment is very dangerous, may be seriously damaged due to equipment failure and parts, and needs maintenance.
The wear of ordinary amusement equipment needs to go through the above three processes. In these three different processes, we need to adopt different approaches. In the daily operation of the equipment, the staff should check and maintain the equipment in time according to the requirements to ensure the stable operation of the equipment.
2. Special requirements for metal structure of leisure equipment:
1. The coating requirements of the amusement equipment on the metal structure should meet the rust prevention standards. Only with a good rust prevention standard, in order to reduce the corrosion of amusement equipment.
2. For the stressed metal of the entertainment equipment, the corrosion depth should be lower than the thickness of the prototype stiffness. Therefore, better anti-rust treatment is required.
3. Some entertainment equipment is installed with metal tracks, and the wear thickness of these tracks also needs to be strictly controlled.
Therefore, when operating the amusement facilities, the metal structure should be well maintained to reduce the possibility of damage to the amusement facilities.
